P
Prescott
Posts: 2,569
Nov 16, 2009 11:53pm
Any suggestions??? Jigsaw, router, or circular saw?? Special blade? Please help!!!
LocoEngineer66
Posts: 790
Nov 17, 2009 12:06am
circular saw ... fine tooth blade .... mark where you want to cut ... put masking tape on top of mark completely across countertop and then make mark again on top of tape ... that will keep it from chipping laminate.
ytownfootball
Posts: 6,978
Nov 17, 2009 12:07am
Circular saw with a sharp blade works fine, tape off where you're going to cut and mark your line on the tape, this prevents chipping of edges of the laminant.
Cuttin gets a little tricky if the backsplash is attatched but it can be done
Cuttin gets a little tricky if the backsplash is attatched but it can be done
ytownfootball
Posts: 6,978
Nov 17, 2009 12:09am
good post loco
LocoEngineer66
Posts: 790
Nov 17, 2009 12:16am
lol thanks
P
Prescott
Posts: 2,569
Nov 17, 2009 10:20am
I will give that a try. Thanks!!!